Misted Double Glazing in Pontefract — Made-to-Measure Replacement Sealed Units
When a window in your Pontefract home fogs up between the panes — a cloudy film you can’t wipe away — the sealed glass unit has blown. The seal has failed and moisture is now trapped inside the cavity. The permanent fix is a single made-to-measure replacement unit, and PTF Glass makes exactly that at our Bramley workshop, supplied to Pontefract ready for you or your glazier to fit into your existing frame.
Misted Glass in Pontefract’s Period & Estate Homes
Pontefract is one of West Yorkshire’s oldest market towns, with a housing mix that runs from Georgian and Victorian properties around the Market Place and Micklegate to the inter-war and post-war estates spreading out through Carleton, Chequerfield and on towards Knottingley. Older period frames and decades-old estate glazing alike now hold a lot of sealed units that have reached the age where the original edge seals start to give way and the glass blows.
The cause is consistent across them all. A double glazed unit relies on a continuous perimeter seal to keep a dry, gas-filled cavity between two panes. As that seal ages and weathers, the gas leaks out and moist air enters, condensing on the inner glass into the misty haze you can see but never reach. It can’t be cleaned, dried or re-sealed in situ — the only lasting answer is a new factory-sealed unit made to the original size.
Supplying Pontefract from Bramley
PTF Glass manufactures in Bramley, Leeds (LS13 4EN), an easy run from Pontefract via the motorway. Measure your failed unit, send us the width, height, thickness and glass type, and we make a matched replacement. Collect it from Bramley at no extra cost, or ask for a delivery price into Pontefract when you order. As the maker, we quote you directly for the finished unit, with no national-chain margin layered on top.
Older period properties sometimes have non-standard or larger panes, so it helps to give us accurate sizes when you ask for a price — we’ll talk you through how to measure if you’re unsure.
Keep the Frame — Replace Only the Glass
For Pontefract’s period homes this is the reassurance that matters: a misted window almost never means a whole new window. The frame is usually sound, and on older properties is often worth keeping for its character. It’s the sealed glass unit that has failed, and that single part is all you replace. A new unit, made to your measurements and matched to the existing glass and spacer, fits straight back into your frame once the beading is removed — restoring clarity and insulation without changing the window’s look.
Fit it yourself if you’re confident, or have any Pontefract glazier fit a unit ordered through us. Our cost of replacing a double glazed unit guide sets out typical prices by size.
Signs the Unit Has Blown
- A foggy or milky haze sealed between the panes that won’t clean off
- Water droplets or a tide-mark visible inside the glass on cold mornings
- A pane that feels colder than the room, where the gas fill has leaked away
- A dull, cloudy window however thoroughly you clean it
If condensation forms on the room-facing surface — the side you can wipe — that usually points to humidity and ventilation rather than a blown unit, common in older, draught-proofed rooms. Our condensation in double glazed windows guide helps you tell them apart, and our double glazing wet inside guide covers the wetter cases.
Why Pontefract Trusts PTF Glass
PTF Glass has made and supplied glass across Leeds and West Yorkshire since 2008 — over 15 years — with a 4.8 out of 5 rating from 47 Google reviews. Every replacement sealed unit carries our own 5-year guarantee against sealed-unit failure, plus the Eurocell 10-year manufacturer guarantee on windows. Fixed pricing, made-to-measure manufacturing and honest advice as standard. The full service is set out on our misted unit replacement page.
Get a Price for Your Pontefract Replacement Unit
Send us the sizes of your blown unit and we’ll give you a clear, no-obligation price for a made-to-measure replacement — ready to collect from Bramley or for delivery into Pontefract.
Frequently Asked Questions
Do you cover Pontefract and nearby areas like Knottingley and Featherstone?
Yes. We supply made-to-measure replacement sealed units across Pontefract and the surrounding areas including Knottingley, Featherstone and Carleton. Units are made at our Bramley base (LS13 4EN) for collection, or we can arrange delivery — ask for a price when you order.
My property is old with unusual window sizes — can you still make a unit?
Yes. Every unit is made to measure, so non-standard and larger panes common in Pontefract’s older homes are no problem. Give us the width, height, thickness and glass type and we’ll make a like-for-like replacement; we’re happy to explain how to measure if you’re unsure.
Does a new unit improve insulation?
Yes. A blown unit has lost its insulating gas fill, so a new factory-sealed unit restores the window’s thermal performance. Opting for Low-E glass in the replacement reduces heat loss further.
How long does a made-to-measure unit take?
Standard clear units are typically ready within 7–14 working days for collection from Bramley or delivery into Pontefract. Toughened or specialist glass can take a little longer.
Do you fit the glass in Pontefract?
No — PTF Glass supplies the made-to-measure unit only. You or your own glazier fit it into the existing frame. Single units usually drop straight in once the beading is removed, and any local Pontefract glazier can fit a unit you’ve ordered from us.